Nortel BayStack 425-24T Manual page 25

Figure 10 IP Configuration/Setup screen
In-Band Stack IP Address:
In-Band Switch IP Address: [ 134.177.224.102 ]
In-Band Subnet Mask:
Default Gateway:
IP Address to Ping:
Start Ping:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
6
7
IP Configuration/Setup
BootP Request Mode:
Configurable
------------------
[ 0.0.0.0 ]
[ 255.255.255.0 ]
[ 134.177.224.1 ]
[ 10.30.40.1 ]
[ No ]
For a standalone switch, in the In-Band Switch IP Address field, enter the IP
switch in dotted-decimal notation.
address of the
For a stack configuration, in the In-Band Stack IP Address field, enter the
Stack IP address in dotted decimal notation.
Note: The In-Band Switch IP Address field allows this switch to operate
as a standalone switch. However, this field is not required for the operation
of the stack. You cannot enter the same IP address in both fields.
[ BootP Disabled
In Use
--------
0.0.0.0
134.177.224.102
255.255.255.0
134.177.224.1
Installing the BayStack 425 Switch
23
]
Last BootP
-----------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0