Clearances
Indoor Unit Placement
Do not install the unit in an area where flammable
WARNING
!
materials are present due to risk of explosion resulting
in serious injury or death.
If the basis underneath the unit is not strong enough to
support the weight of the unit, the unit could be fall out
of place and cause serious injury.
Use the provided and specified components when
installing equipment. Failure to do so may result in
unit falling, water leaking or electrical shocks, causing
personal injury or equipment or property damage.
Check stability of wall-mounted unit support. If support
is not capable of carrying weight of the unit, unit may fall
causing personal injury or equipment damage.
Consider the possibility of earthquakes in your area
when installing the equipment. If the unit is not correctly
secured, it may fall, causing personal injury or equipment
damage.
Safely dispose of packing materials, which include
nails, wood and other sharp objects, as well as plastic
wrapping. Children playing with plastic wrap or bags risk
the danger of suffocation.
36
(914)
Minimum Vertical Clearances:
Minimum Clearance from Structural Ceiling to Drop Ceiling:
10-1/4 inches (260 mm) - 007, 009, 012, 015 models
Minimum Clearance to Floor:
98-1/2 inches (2500 mm)
36
(914)
(914)
36
(914)
CAUTION
Do not place items which may be damaged by water
under or around the indoor unit.
The unit should be installed at least 8 feet above the
floor (if possible) to ensure maximum performance
AVOID
Do not install the unit in the following locations:
•
Areas exposed to salt or other corrosive materials or
caustic gases
•
Areas exposed to extreme voltage variations (such
as factories)
•
Tightly enclosed areas that may impede service of the
•
unit.
•
Areas exposed to strong electromagnetic forces
•
Areas exposed to acids or alkaline detergents (laundry
rooms)
•
4
36