Fan; Drawer Gasket - Henny Penny HCH-930 Technical Manual

Heated holding cabinet

Hide thumbs Also See for HCH-930:

Table of Contents

2-17. FAN

203

1. Disconnect the electrical supply to the cabinet.

To avoid electrical shock or property damage, move the

power switch to OFF and disconnect main circuit breaker,

or unplug cord at wall receptacle.

2. Remove the cabinet top.

3. Cut the fan wires about 6 inches (152.4 mm) from the fan.

Step 3

4. Remove the 4 nuts and screws securing the fan and remove fan

from the cabinet.

5. Install new fan in reverse order.

6. Strip ends of cut wires and connect them to the new fan wires.

Step 4

7. Replace cabinet top.

8. Reconnect electrical supply to cabinet.

1. Remove the basket from the drawer and basket from the cabinet.

2. Remove the 2 screws securing the drawer handle and remove the

handle from the drawer. (Location of mounting screws may vary

depending on type of handle on the drawer.)

Step 2

Model HCH-930/932

2-11

Table of Contents

Hch-932