Toyota CAMRY HYBRID 2021 Owner's Manual page 477

■
Initialization procedure (vehicles with a tire pressure warning system)
● Make sure to perform the initialization procedure after adjusting the tire infla-
tion pressure.
Also, make sure the tires are cold before performing the initialization proce-
dure or adjusting the tire inflation pressure.
●
If the power switch is turned off during initialization, it is not necessary to
restart the initialization procedure from the beginning as it will begin auto-
matically when the power switch is turned back to ON mode.
●
If initialization has accidentally been started when it is not necessary, adjust
the tire inflation pressure to the specified level when the tires are cold and
then perform the initialization procedure again.
●
While the position of each tire is being determined and the inflation pres-
sures are not being displayed on the multi-information display, if the inflation
pressure of a tire drops, the tire pressure warning light will come on.
■
Warning performance of the tire pressure warning system (vehicles with
a tire pressure warning system)
The warning of the tire pressure warning system will change in accordance
with the conditions under which it was initialized. For this reason, the system
may give a warning even if the tire pressure does not reach a low enough
level, or if the pressure is higher than the pressure that was adjusted to when
the system was initialized.
CAMRY_HV_GE
CAMRY HYBRID_OM_General_OM33F09E
6-3. Do-it-yourself maintenance
475
6