Toyota CAMRY HYBRID 2021 Owner's Manual page 341

Curve speed reduction function
While driving in vehicle-to-vehicle distance control mode, this function
will reduce the vehicle speed, if it is determined to be necessary.
Function operation
■
When the steering wheel begins to be turned, the vehicle speed will
begin being reduced. When the steering wheel is returned to the
center position, the vehicle speed reduction will end.
Depending on the situation, the vehicle speed will then return to the
vehicle-to-vehicle distance control mode set speed.
In situations where vehicle-to-vehicle distance control needs to
operate, such as when a preceding vehicle cuts in front of your
vehicle, the curve speed reduction function will be canceled.
Operation display
■
Displayed when the vehicle
speed is being reduced.
When the vehicle speed reduc-
tion ends, the display will disap-
pear.
Changing the settings of the curve speed reduction function
■
The curve speed reduction function can be enabled/disabled and
the vehicle speed reduction strength can be adjusted.
Press
1
Press
2
Reduction".
Press
3
Each time
CAMRY_HV_GE
CAMRY HYBRID_OM_General_OM33F09E
4-5. Using the driving support systems
of the meter control switches, select
/
of the meter control switches, select "Curve Speed
/
of the meter control switch.
is pressed, the function changes on/off.
339
4
.