326
4-5. Using the driving support systems
■
Automatic cancelation of constant speed control mode
Constant speed control mode is automatically canceled in the following situa-
tions:
●
Actual vehicle speed is more than approximately 16 km/h (10 mph) below
the set vehicle speed.
●
Actual vehicle speed falls below approximately 30 km/h (20 mph).
●
VSC is activated.
●
TRC is activated for a period of time.
●
When the VSC or TRC system is turned off.
●
When the brake control or output restriction control of a driving support sys-
tem operates. (For example: Pre-Collision System, Drive-Start Control)
If constant speed control mode is automatically canceled for any reasons
other than the above, there may be a malfunction in the system. Contact your
Toyota dealer.
■
Situations in which the curve speed reduction function may not operate
In situations such as the following, the curve speed reduction function may
not operate:
●
When the vehicle is being driven around a gentle curve
●
When the accelerator pedal is being depressed
●
When the vehicle is being driven around an extremely short curve
■
Brake operation
A brake operation sound may be heard and the brake pedal response may
change, but these are not malfunctions.
■
Warning messages and buzzers for dynamic radar cruise control with
full-speed range
Warning messages and buzzers are used to indicate a system malfunction or
to inform the driver of the need for caution while driving. If a warning message
is shown on the multi-information display, read the message and follow the
instructions. (P. 280, 530)
CAMRY_HV_GE
CAMRY HYBRID_OM_General_OM33F09E