Periodic maintenance and adjustment
3. Insert a new bulb into the socket
by pushing it in.
NOTICE
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
4. Install the lens by installing the
screw.NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
10
Replacing the license plate
light bulb
ECAU0081
1. Remove the license plate light unit
by removing the screw.
[ECA11192]
1. Screw
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
EAUM3510
1
1. License plate light bulb
10-32
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screw.
1