settings while riding can distract the
operator and increase the risk of an
accident.
The "MENU" switch is located on the
left side of handlebar. This switch al-
lows you to control or change the set-
tings of multi-function meter unit.
1
1. Menu switch "MENU"
TIP
Be sure to turn the main switch on be-
fore using the "MENU" switch.
Instrument and control functions
Incoming call indicator "
This indicator flashes when there is an
incoming call to the connected smart-
phone. If you do not answer the call,
the indicator stays on until you turn the
vehicle off.
TIP
This function works only when a smart-
phone is connected to the vehicle.
Notification indicator "
This indicator flashes for 10 seconds
when the connected smartphone re-
ceives an SNS, E-mail or other notifica-
tion. After that, the indicator stays on
until you turn the vehicle off.
TIP
This function works only when a
smartphone is connected to the
vehicle.
Notifications must be setup for
each application on the connect-
ed smartphone in advance.
7-5
EAUV0990
"
Yamaha Motorcycle Connect icon
This icon comes on when CCU and
smartphone is connected via Yamaha
Motorcycle Connect.
TIP
Even if the smartphone is not connect-
ed, when the vehicle is turned on, this
icon should come on for a few sec-
onds. Otherwise have a Yamaha dealer
check the CCU and the electrical cir-
cuit.
EAUV1000
"
Smartphone battery level meter
This meter indicates the current battery
level of the connected smartphone.
The display segment of the meter dis-
appears from full to blank as the bat-
tery
level
approximately 10% or less of the bat-
tery remains, the last segment starts
flashing.
TIP
Even if the smartphone is not connect-
ed, when the vehicle is turned on, this
icon should come on for a few sec-
EAUN2860
EAUN2872
7
decreases.
When