Removing And Installing Panels - Yamaha Aerox GDR155 Owner's Manual

Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
1
2
1. Panel A
2. Panel B
Panel A
To remove the panel
1. Open the fuel tank cap lid.
2. Remove the screws.
Periodic maintenance and adjustment
EAU18773
1
1. Screw
2. Quick fastener screw
3. Extend the right passenger foot-
rest, and then pull the panel out-
ward.
EAUV0970
1. Fuel tank cap lid
2. Panel A
To install the panel
1. Place the panel in the original po-
2
2. Retract the right passenger foot-
3. Close the fuel tank cap lid.
1
Panel B
To remove the panel
1. Remove panel A.
2. Remove the right floorboard mat
2
10-7
sition, and then install the screws.
rest to its original position.
by pulling it up.
10