Pre-Use Inspection - BRP SEA-DOO ADVANCED TEC 2010 User Manual

Pre-Use Inspection

Perform a pre-use inspection before each use to detect potential problems
during operation. The pre-use inspection can help you monitor wear and
deterioration before they become a problem. Correct any problems that
you discover to reduce the risk of a breakdown or crash. See an authorized
Sea-Doo personal watercraft (PWC) dealer as necessary.
Make sure the hitch ball size matches the coupler size.
Check that the personal watercraft (PWC) is ready to be towed according to the
PWC manufacturer's recommendations.
Check that the jack is retracted.
Check that wheel blocks are removed and properly secure to the tongue.
Check tires condition and if they are properly inflated. Refer to
PROCEDURES
for details.
Check tightness of wheel lug bolts.
Check if load is within maximum load carrying capacity.
Check if coupler is latched and locked.
Check if tongue safety cables or chains are crisscrossed under tongue and
attached to hitch.
Check that taillights are properly secured to the trailer.
Check lights operation.
Clean all reflectors and lights lenses.
Check if personal watercraft (PWC) is properly secured to the trailer at rear.
Check that the iCatch system or winch is locked.
Make sure the personal watercraft (PWC) is properly secured at front using the
safety cable.
OPERATION
https://www.boat-manuals.com/
WARNING
_______________
BEFORE GETTING UNDERWAY
MAINTENANCE
✔
21