Fuses - BMW G 310 GS Rider's Manual

Attach the right side of the
holder to the battery tray 2.
Fold the holder 1 down and
attach on the left.
The wiring harness 3 is now
back in its initial position.
Install screw 1.
Connecting battery to motor-
cycle ( 98).
Installing the seat (
NOTICE
If the vehicle has been discon-
nected from the battery for a sig-
nificant time, the current date will
have to be entered in the instru-
ment cluster to guarantee correct
operation of the service display.
Setting the date (

Fuses

Replace fuses
ATTENTION
Jumpering of blown fuses
Risk of short-circuit and fire
Never attempt to jumper a
blown fuse.
Always replace a defective fuse
with a new fuse of the same
amperage.
Switch off the ignition.
Place the motorcycle on its
44).
stand on firm, even ground.
Removing seat (
41).
Press latch 1.
Open the fuse box 2.
Consult the fuse assignment
diagram below and replace the
defective fuse.
Fuse assignment (
Close the fuse box 2 again.
Make sure that the lock 1 has
engaged.
43).
8
99
z
100)