Operation; Service Parts; Maintenance - Broan RHVBB20SM Instruction Manual

Power module
Table of Contents

Advertisement

Available languages

Available languages

OPERATION

Controls
The light switch turns the lamps on and off.
The blower switch: makes it possible to select the motor operating
speed. Position 0: motor off.
The pilot lamp lights up whenever the blower is on.
LIGHT
SWITCH

MAINTENANCE

ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE
CARRYING OUT ANY OPERATIONS ON THE APPLIANCE.
Grease Filter
The grease filter should be cleaned frequently. Use a warm detergent
solution. Grease filter is dishwasher safe.
To remove the grease filter: remove the grid by moving the 2 slide
fasteners "A" (Fig. 2); remove the metal wires and then the grease
filter (Fig. 9).
GREASE FILTER
Non-Ducted Recirculation Filter
The Non-Ducted Recirculation filter should be changed every 6
months.
To remove the Non-Ducted Recirculation filter:
1. Remove the grid by moving the 2 side fasteners "A" (Fig. 2).
2. Remove the metal wires (Fig. 6) and replace the Non-ducted
recirculation Filter.
Cleaning
Occasional care will help preserve its fine appearance.
• Clean with warm water and mild detergent only.
• Follow all cleaning by rinsing with clear water.
• Wipe dry with clean, soft cloth.
Light bulbs
This range hood requires two 40-Watt light bulbs (not included).
To change bulbs:
1. Remove the grid by moving the 2 slide fasteners (A).
2. Replace with light bulbs of the same type (MAX 40W, 120V,
Candelabra Base Bulb). CAUTION: BULB MAY BE HOT!
BLOWER
SWITCH
PILOT LAMP
METAL WIRES

SERVICE PARTS

KEY NO.
PART NO.
4
B03295083
5
B03118154
6
B02011013
9
B08087922
14
B02300233
27
B02011155
28
B02300280
29
B03293051
45
BW0000043
48
B02310203
49
B03295076
53
B03202007
86
B08088378
FIG. 8
115
BE3334250
116
BE3334252
134
B03295084
152
B03292200
165
B03294780
165
B03295008
202
B03294779
222
B03295080
223
B03295082
228
B08086263
229
B03201014
241
B03295081
472
BE3344843
472
BE3348478
473
BE3348555
AQI
B06108607
-
-
B08999040
FIG. 9
DESCRIPTION
Side Fastener
Grid
Spring
Grease Filter
Condenser
Metal Wires
Lampholder
Light Fitting
Blower
Motor
Blower Wheel
Rubber Washer
Damper
Wiring Box
Wiring Box Cover
Grid Stop
Wire Clamp
Controls Box
Box Condenser
Runner Wires
Control Box Cover
Blower Switch
Controls Board
Pilot Lamp
Light Switch
Controls Bracket
Right Reflector
Left Reflector
Switch box Assembly
(Included Key No. 165, 228,
28, 222, 152, 241, 223, 202,
229)
-
"40 Watt Max.Candelabra
Bulbs not included"
Non-Ducted Filter Kit
(purchased separately)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pm390 series

Table of Contents