Throughput Testing; Measuring Throughput Using Jdsu Qos - JDS Uniphase HST-3000 User Manual

Chapter 3 Data testing

Throughput testing

Throughput testing

Measuring throughput using JDSU QoS

50
6 Select either Log-Off or IP-Release.
The Log-Off and IP-Release options are only available
when you are viewing the IP results window.
The IP address is now available for use in other applica-
tions.
Using the FTP/HTTP throughput feature, you can perform a
file transfer to test the throughput of the circuit.
To test throughput
1 Specify the FTP/HTTP settings (see
HTTP settings" on page
2 Navigate to the FTP/HTTP results screen.
3 Press the Actions soft key.
4 Select FTP/HTTP and then Enter Address.
5 Enter the address using the keypad, including the prefix
(ftp: or http: or, if applicable, https:) and the filename.
For example, ftp://10.0.0.1/name
6 Press OK to begin the file transfer.
The throughput results appear on the screen.
See "FTP/HTTP results" on page 73
interpreting the results.
JDSU QoS (also called Iperf) is a method of qualifying copper
lines to verify the throughput supported for the copper wire for
voice and video traffic. This is a network testing tool that can
create TCP and UDP data streams and measure the
HST-3000 xDSL Testing User's Guide
"Specifying FTP/
44).
for information on