Handle Positions; Care & Maintenance - Chicco Rodeo Manual

forward while "galloping", based on the child's weight. In position 1 (approximate weight of the child:
up to 13kg), the system adjusts the movement of the horse with respect to the average strength of a
push by a child, during that age. Positions 2 and 3 follow the phases of the child's growth, and there-
fore adjust the movement of the horse on the basis of the child's strength.

HANDLE POSITIONS

• POSITION 1: For children of up to 13kg (28 lbs) of weight.
• POSITION 2: For children from 13kg up to 16kg (28 up to 35 lbs) of weight.
• POSITION 3: For children of over 16kg (35 lbs) of weight.
• The weights indicated above are only provided for reasons of reference and are therefore only a guide. Re-
gardless of the position of the handle and of the child's age or weight, the toy will always be safe to use.
• LOCK POSITION: This position should be used when the horse is in the rocking mode or when the
child wishes to use it only as a classic riding toy (that is, when the child wishes to move the toy for-
ward without activating the "galloping" mode).
Diag. 7
• When the toy is in the "ROCKING" mode, turn the central handle to the "lock" position. Place the
horse onto the rocking bases, ensuring that the joints of the wheel correspond with the upper hous-
ings of the rocking bases. Press each of the 4 wheels, until a click is heard, indicating that the wheel
is correctly locked into position. Ensure that each wheel is safely locked into position to avoid that
the toy may overturn.
Diag. 8
• When the toy is in the "RIDING" mode, remove the rocking bases exercising some pressure, and then
turn the central handle to the desired position of use (see diag. 6).
CARE & MAINTENANCE
• Clean the toy with a soft dry cloth to prevent the risk of damaging the electronic circuit.
• Handle the toy with care and protect it from heat, dust, sand, humidity and water.
• When replacing damaged or worn components, only use original spare parts.
• Long exposure to sunrays could cause the fading of the plastic parts of the toy. This is normal and
does not jeopardise the safety of the product.
Made in Romania
12