Insert Battery To Npm-2Nx Assembly; Insert Battery-Cover To Npm-2Nx Assembly - Nokia NPM-2NX Assembly And Disassembly Instructions

CCS Technical Documentation
2.

Insert battery to NPM-2NX assembly

In step one, push the battery (58) against the springs of the battery connector (25).
In step two, push the battery from its front end downwards until it snaps onto the metal
deck (28).
3.

Insert battery-cover to NPM-2NX assembly

In step one, push the battery cover (10) downwards in the Z-direction until it hits the D-
cover (27). In step two, push the battery cover towards the antenna cover (9) until it
snaps from the front-end snap joint in it. Make sure all five (two on each side and one at
the bottom end) bonding hooks of the battery cover are properly hooked.
Issue 1 07/02
Assembly & Disassembly Instructions
ãNokia Corporation
NPM-2NX
Page 9