CCS Technical Documentation
8.
Remove LCD / PWB assembly from A-cover
Screw towers in A-cover guides LCD / PWB assembly.
Note: Gloves and ESD protection are mandatory in this phase of disassembly to pre-
vent fingerprints and damage in engine.
9.
Remove LCD-module from PWB
LCD module is properly disassembled when two snaps joints in metal frame are released
from PWB.
Note: Gloves are mandatory if LCD-module will be reused. Also use ionized air for
clean dirt from LCD before assembling it back to A-cover. Handle the elas-
tomer connector with care.
10.
Remove Keymat from A-cover
Lift keymat upwards from its rear end first. Then slide softkey away from its recess.
Issue 1 07/02
Assembly & Disassembly Instructions
ãNokia Corporation
NPM-2NX
Page 15