Step-By-Step Disassembly Instructions; Remove Battery-Cover From Mozart Assembly; Remove Dust Cap For Rf-Connector From Antenna Cover; Remove Antenna-Cover From Mozart Assembly - Nokia NPM-2NX Assembly And Disassembly Instructions

NPM-2NX
Assembly & Disassembly Instructions

Step-by-Step Disassembly Instructions

1.

Remove battery-cover from Mozart assembly

Slide battery cover backwards in Y-direction while pushing hard from its middle front
area using your thumb. Slide the battery cover long enough to release snap joints and
hooks on sides of it.
2.

Remove dust cap for rf-connector from antenna cover

Lift dust cap upwards from its hole using your fingernail or a screwdriver with a chisel
point.
3.

Remove antenna-cover from Mozart assembly

Release two snap joints one after another, first at the rear end of the cover. Use a screw-
driver as a lever arm between the D-cover and the Antenna-cover.
Page 12
SNAPS
ãNokia Corporation
CCS Technical Documentation
Issue 1 07/02