Biostar M6VLR User Manual page 52

Chapter 2
SB DMA Select
Change the SoundBlaster Pro direct memory access setting.
The Choices: DMA0, DMA1 (default), DMA2, DMA3.
MPU-401
Enable or Disable MPU-401 function.
The Choices: Enabled (default), Disabled.
MPU-401 I/O Address
Change the SoundBlaster Pro MPU-401 I/O address.
The Choices: 300-303H, 310-313H, 320-323H, 330-333H (default).
Game Port (200-207H)
Change the joystick connect port address.
The Choices: Enabled (default), Disabled.
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
The Choices: PCI Slot (default), AGP.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read/ write. If you IDE hard drive supports block mode (most new drives do),
select Enabled for automatic detection of the optimal number of block mode
(most new drives do), select Enabled for automatic detection of the optimal
number of block read/ write per sector the drive can support.
The Choices: Enabled (default), Disabled.
Onboard PCI LAN
This item allows you to enabled or disabled the onboard PCI LAN function.
The Choices: Enabled (default), Disabled.
Onboard Lan Boot ROM
This item allows you to decide whether to invoke the boot ROM of the onboard
LAN chip.
The Choices: Enabled (default), Disabled.
2-18
BIOS Setup