Biostar M6VLR User Manual page 45

Chapter 2
Processor Number Feature
The Intel processor serial number control option.
The Choices: Enabled, Disabled (default).
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Enabled (default)
Disabled
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical drive
assignments.
The Choices: Enabled, Disabled (default).
Boot Up Floppy Seek
Enabling this option will test the floppy drives to
80 tracks. Disabling this option reduces the time it takes to boot-up.
The Choices: Enabled (default), Disabled.
Boot Up NumLock Status
Selects the NumLock. State after power on.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can be
configured.
The Choices: Disabled (default), Enabled.
Enable quick POST.
Normal POST.
determine if they have 40 or
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller
controls Gate A20.
Lets chipset control Gate A20.
2-11
BIOS Setup