Biostar M6VLA User Manual page 74

Chapter 4
Error reading drive A:
PROBABLE CAUSE
Bad floppy disk.
Floppy disk not formatted
C: drive failure.
PROBABLE CAUSE
SETUP program does not
have correct information.
Hard Drive cable not
connected properly.
Cannot boot system after installing second hard drive.
PROBABLE CAUSE
Master/Slave jumpers not
set correctly.
Hard Drives not
compatible / different
manufacturers.
PROBLEM
DIAGNOSIS
Try new floppy disk
Format floppy disk (type
FORMAT A:type
ENTER)>
PROBLEM
DIAGNOSIS
Boot from drive A: using
DOS system disk. Input
correct information to
SETUP program.
Check Hard Drive cable.
PROBLEM
DIAGNOSIS
Set Master/Slave jumpers
correctly.
Run SETUP program and
select correct drive types.
Call Drive manufacturers
for compatibility with other
drives.
4-8
Trouble Shooting
SOLUTION
SOLUTION
SOLUTION