Table of Contents
Advertisement
Chapter 2
Typematic Rate Setting
This determines the typematic rate.
Enabled
Disabled (default)
Typematic Rate (Chars/Sec)
6 (default)
8
10
12
15
20
24
30
Typematic Delay (Msec)
Choose the length of delay from the time you press a key and the character
repeating. (units are mil-sec)
The Choices: 250 (default), 500, 750, 1000.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
Setup (default)
OS Select for DRAM > 64MB
Allows OS/2 to be used with > 64MB of DRAM. Settings are Non-OS/2 and
OS/2. Set to OS/2 if using more than 64MB and running OS/2.
Default is Non-OS2.
Enable typematic rate and typematic delay
programming.
Disable typematic rate and typematic delay
programming. The system BIOS will use
default value and the keyboard controls the
function.
6 characters per second
8 characters per second
10 characters per second
12 characters per second
15 characters per second
20 characters per second
24 characters per second
30 characters per second
The system will not boot and access to
Setup will be denied if the correct
password is not entered at the prompt.
The system will boot, but access to Setup
will be denied if the correct password is not
entered at the prompt.
2-13
BIOS Setup
Advertisement
Table of Contents
