08/2012
Connect the lines
Minimize the length of the lines above the
lower cover to place the lines without any
problems and do not clamp the lines when
snapping-on the upper cover.
Connect the lines according to the labeling: a
b E P (from the button to the top), floor push
button at a – E.
Wiring example see page 9.
Snap-on the upper cover
Set on the upper cover at both adjustment
increments of the lower cover (1).
Snap-on the upper cover below with slight
pressure (2)
Connect the handset
Plug the western connector of the handset
cord into the socket at the underside of the
telephone.
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
7
floor push button
Subject to technical changes.
PI_ISH3230-uk
1
2
2A