Mercedes-Benz E-Class Owner's Manual page 118

Seats
116
! To avoid damage to the seats and the seat
heating, observe the following information:
do not spill any liquids on the seats. If
R
liquid is spilled on the seats, dry them as
soon as possible.
if the seat covers are damp or wet, do not
R
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
clean the seat covers as recommended;
R
see "Interior care".
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating mate-
rials, e.g. blankets, coats, bags, seat cov-
ers, child seats or booster seats.
! Make sure that there are no objects in the
footwell or behind the seats when moving
the seat back. There is a risk that the seats
and/or the objects could be damaged.
i The head restraints in the front seats are
fitted with the NECK-PRO system
( Y page 49). For this reason, it is not pos-
sible to remove the head restraints from
the front seats.
Vehicles without the through-loading fea-
ture: the head restraints cannot be
removed from the rear compartment seats.
For more information, contact a qualified
specialist workshop.
Further related subjects:
i
Through-loading facility in the rear bench
R
seat (Saloon) (
EASY-PACK through-loading facility in
R
the rear bench seat (Estate)
( Y page 337)
Y page 336)
Adjusting the seats manually and
electrically
Seat cushion angle
:
Seat height
;
Backrest angle
=
Seat fore-and-aft adjustment
?
X
Seat fore-and-aft adjustment: lift
lever ? and slide the seat forwards or
backwards.
X
Release lever ? again.
Make sure that you hear the seat engage in
position.
Adjusting the seats electrically
Head restraint height
:
Seat cushion angle
;
Seat height
=