Sony PEG-TG50 Intellisync Operating Instructions Manual page 99

Protective cover
you can remove the protective cover as follows.
Removing the protective cover
1
Push 1 with your left hand.
2
Remove the cover in the direction 2 pulling the other side
of 1.
Attaching the protective cover
1
Fit the projection on the left of the cover to the hole in
your CLIÉ handheld.
2
Attach the cover in the direction 2 pushing the projection
on the right of the cover into the hole of your CLIÉ
handheld.
Note
Do not force to attach the cover without pushing the projection. The projection may
be broken.
99