Restarting Your Sony Clié Handheld - Sony PEG-TG50 Intellisync Operating Instructions Manual

Restarting your Sony CLIÉ handheld
Normally, you do not need to reset your CLIÉ handheld. However, should your
CLIÉ handheld not turn on or not respond, you can perform a soft reset to solve
the problem.
Follow the procedure below to reset your CLIÉ handheld.
Performing a soft reset
All records and entries stored in your CLIÉ handheld are retained even after
performing a soft reset.
1
Take out the stylus pin by unscrewing the metal barrel
from the stylus quill.
2
Use the stylus pin to gently press the RESET button.
The system shuts down and then restarts.
After restarting, the system displays "palm
powered," "CLIÉ," and "SONY," followed
by the Preferences screen for setting the
time and date.
Notes
• After the RESET button is pressed, it takes a while until the Preferences
screen is displayed. Be sure not to press the RESET button again while resetting.
• Do not press the RESET button with anything other than the stylus pin. It may
cause a malfunction.
26