Important Safety Instructions
Caution
•
To prevent shock, do not open the
cabinet. No user-serviceable parts
inside.
•
Please read this user's manual before
you operate your projector. Save this
user's manual for future reference.
•
Do not look straight at the projector
lens during operation. The intense
light beam may damage your eyes.
•
Refer servicing to qualified service
personnel.
•
Always open the lens shutter or
remove the lens cap when the
projector lamp is on.
•
In some countries, the line voltage is
NOT stable. This projector is designed
to operate safely within a bandwidth
of 100 to 240 volts, but could fail if
power cuts or surges of 10 volts
occur. In these high-risk areas, it is
recommended to install a power
stabilizer unit.
Important Safety Instructions
1