Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook page 94

Changing the Network preferences
Send CR
Send User ID
Send Password
Delay
Get IP
Prompt
End
5
Repeat step 4 until the log-in script is complete.
6
Tap OK.
The Details screen is displayed.
7
Tap OK.
The Network Preferences screen is displayed.
Customizing your Sony CLIÉ™ handheld (Preferences)
Transmits a carriage return or LF character to the TCP/IP
server to which you are connecting.
Transmits the User ID information entered in the User ID
field of the Network Preferences screen.
Transmits the password entered in the Password field of
the Network Preferences screen. If you did not enter
a password, this command prompts you to enter one. The
Password command is usually followed by a Send CR
command.
Tells your CLIÉ handheld to wait a specific number of
seconds before executing the next command in the log-in
script.
Reads an IP address and uses it as the IP address for your
CLIÉ handheld. This command is used with SLIP
connections.
Opens a dialog box and prompts you to enter text of some
kind (for example, a password or a security code).
Identifies the last line in the log-in script.
94