Inserting And Removing A "Memory Stick" Media - Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook

Using "Memory Stick

Inserting and removing a "Memory Stick" media

Insert a "Memory Stick" media into the "Memory Stick" slot.
The "Memory Stick" LED blinks
in orange while your CLIÉ
handheld is accessing "Memory
Stick" media
While the power of your CLIÉ handheld is on, the applications in the "Memory
Stick" media will be displayed on the Application Launcher screen
automatically if you insert the "Memory Stick" media into the slot (the feature
does not work when certain application is running).
Notes
• Insert a "Memory Stick" media in the right direction. If it is forced in the wrong
direction, it may be damaged.
• Do not insert a "Memory Stick" media into the place other than the "Memory Stick"
slot.
To remove "Memory Stick" media
Make sure that your CLIÉ handheld is not writing to or reading data from
"Memory Stick" media. Push the "Memory Stick" media gently into the slot to
release it. When the "Memory Stick" media has popped out, pick it out from
the slot.
Push "Memory Stick" media in
Using "Memory Stick
®
" media
b
®
" media
(Location of the "Memory
Stick" slot may vary
depending on your model.)
Pull "Memory Stick" media out
Continued on next page
127