Sony PEG-NZ90 CLIE Handbook (primary manual) Handbook page 111

Performing a HotSync
Preparing your computer
To perform a HotSync
below to set your computer to receive a call from your CLIÉ handheld.
1
Check the following items.
• The modem is connected to your computer and both the modem and
computer are turned on.
• No communication applications, such as fax or telephone software, are
running on the COM port.
• The computer is disconnected from the Internet.
2
Click the HotSync
right-hand corner of the taskbar) and select Modem from the
shortcut menu.
3
Click the HotSync
and select Setup from the shortcut menu.
The Setup dialog box is displayed.
4
Click the Modem tab.
Exchanging and updating data using a HotSync
®
(Other HotSync operations)
®
operation via a modem
®
operation via a modem, you need to follow the steps
icon in the Windows task tray (bottom
icon in the Windows task tray again
®
Continued on next page
operation
111