Electrical Requirements - Bosch GCM18V-12GDC Operating/Safety Instructions Manual

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 8
saw to cut fiber cement board. Cutting mate-
rials containing crystalline silica may create
exposures to respirable silica dust.
the miter saw.
DESIGNATED DANGER
ZONES
Electric Brake
fuse or other causes, the motor will grad-
ually slow down and the braking action is
initiated ONLY by the release of the trigger
switch.
8
Additional Safety Rules
Do not use the Bosch
GCM18V-12GDC miter
Before each use, review
all warnings located on
DESIGNATED PINCH POINT

Electrical Requirements

When electrical power
is lost due to blown
SAVE THESE INSTRUCTIONS
WARNING
Wear Eye Protection
DESIGNATED NO-CARRY
AREA
safety feature. Remember to let the saw
blade come to a complete stop before rais-
ing the blade from the workpiece. As al-
ways, the guard system is your best
protection against unintentional contact
with a spinning saw blade. NEVER wedge
open or defeat the closing action of the
lower guard.
Do Not Carry the
Saw by this handle.
No lleve la sierra
por este mango.
Ne transportez pas la
scie par sa poignée.
AREA
The brake action of this
saw is not intended as a