Bosch GCM18V-12GDC Operating/Safety Instructions Manual page 20

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 20
plate screws may interfere with and hang
up lower blade guard. Never use saw with-
out cover plate securely in place. Lower
guard will not function properly.
blade does not interfere with the table in-
sert at 0° and 45° bevel positions. Lower
the blade into the blade slot and check for
any contact with the base or turntable
structure. If the blade contacts base or
table, seek authorized service.
Assembling Dust Collection
System
ATTACHING AND ADjUSTING THE
DUST BAG
Attaching and Removing Dust Bag
Adjusting Dust Bag
20
Assembly
Tighten the cover plate
screws. Loose cover
After installing a new
blade, make sure the
Dust Bag
Red Tabs
Zipper
Deflector
USING AND CLEANING THE DUST
BAG
Be extremely careful
when disposing of dust.
Materials in fine particle form may be ex-
plosive. Do not throw sawdust on an open
fire. Spontaneous combustion, in time,
may result from the mixture of oil or
water with dust particles.
Using Dust Bag
Cleaning Dust Bag
Fig. 6
Coupler
Elbow
Dust
Chute
Rubber