Bosch GCM18V-12GDC Operating/Safety Instructions Manual page 58

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 58
Auxiliary Fence
Add 4 holes as dimensioned on pattern -
or- Add holes following the next steps:
OVERALL HEIGHT = 1-1/2" (38mm)
3-1/16"
(78mm)
Nut (need 4)
Flat Washer (need 4)
58
Saw Operations
7-15/32" (190mm)
Drill 4 Holes = 5/16" (8mm) Diameter
Stationary
Saw Base
Fence
Stationary
Saw Base
Fence
OVERALL LENGTH = 26-1/16" (662mm)
10-19/32" (498mm)
5/16" (8mm)
New Auxiliary Fence
Board: 3/4" Wide x 1-1/2" High (19x38mm)
5/16" (8mm) Hole Through
1/2" (13mm) Countersink
1/4" (M6)Flat Head Machine
Screw x 2-1/2" (65mm) Long (need 4)
Top of Base
and Table
Note: The Stationary Fence is permanently
attached to the Saw Base (do not remove)
New Auxiliary Fence
(assembled to Miter Saw)
Top of Base
and Table
8" (203mm)
3-1/16"
(78mm)