Bosch GCM18V-12GDC Operating/Safety Instructions Manual page 40

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 40
MAKING AN AUxILIARY FENCE
and saw head componenents by perform-
ing a dry run.
9.5"
(240mm)
Right Side
7"
(178mm)
2"
2-5/8" (67mm)
(50mm)
40
Preparing for Saw Operations
Check for interference
between auxiliary fence
7"
(178mm)
SLIDE CUT
NOTCH OUT
2-1/2"
(64mm)
26" (660mm)
Fig. 39 Tall Auxiliary Wood Fence - 3/4" (19mm) Thick
Auxiliary
Fence
Flat Head Machine Screws
Be aware of the path of
the saw blade. Make a
dry run with the saw Off by conducting a
simulated cutting cycle, and observe the
projected path of the saw blade. Keep
hands at least six (6) inches (152mm)
away from the projected path of the saw
blade.
4 Mounting Holes
Left Side
(178mm)
2-5/8"
(50mm)
(67mm)
Fig. 38
Blade Slot
7"
5-1/2"
(140mm)
2"