Bosch GCM18V-12GDC Operating/Safety Instructions Manual page 51

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 51
Compound Cuts
clear of blade path and guard system.
interference between moving and station-
ary parts of the saw. Do not operate the
saw in the following range of miter and
bevel combinations: Left Bevel 45° to 47°
PLUS Right Miter 40° to 42°.
WHAT'S A COMPOUND CUT?
Follow these instructions for making your
compound cut:
8
Saw Operations
For compound cutting,
adjust sliding fence
Before sawing, always
check that there is no
22
Fig. 54
36
8
22 30 Workpiece
Use clamping position
that does not interfere
with operation. Before switching on, lower
head assembly to make sure clamp clears
guard and head assembly.
Be aware of the path of
the saw blade. Make a
dry run with the saw Off by conducting a
simulated cutting cycle, and observe the
projected path of the saw blade. Keep
hands at least six (6) inches (152mm)
away from the projected path of the saw
blade.
15
15
36
51