Indoor Unit Display; Auto Restart - Danby DAS120EAQHWDB Owner's Manual

OPERATING INSTRUCTIONS

INDOOR UNIT DISPLAY

1. Temperature display:
• Displays the set temperature
• Displays the error code when a fault occurs
• Displays time remaining during timer
operation
2. Timer: Illuminates during timer operation.
3. Sleep: Illuminates when sleep mode is active.
Note: The shape and position of the indicators may
be different based on your model but the function is
the same.
Note: The display on your indoor unit may only
show two numbers for the temperature when three
numbers are shown on the remote control. For
example, the unit display may show 28° when the
remote control shows 28.5°.
MANUAL CONTROL BUTTON
If the remote controller is not working, the indoor
appliance can be turned on or off using the manual
control button.
Open the front panel, the manual control button will
be on the right hand side.
• Press the manual control button once to set the
unit to run in cool mode.
• Press the manual control button twice to set the
unit to run in heat mode.
• Press the manual control buttons three times to
turn the unit off.

AUTO RESTART

In the case of sudden power failure, the unit will
save the last setting in memory and return to normal
operation when power is restored.
1
14
2
3