Tab. 10.1: Hex R1290I Technical Specifications - Caen RFID Hex R1290I Technical Information Manual

Multipurpose rain rfid reader with poe
Table of Contents

Advertisement

10 TECHNICAL SPECIFICATIONS
Technical Specification Table
Frequency Range
RF Power (Integrated Antenna)
RF Power (External Antenna Port)
Number of Channels
Internal Antenna Gain
Internal Antenna Polarization
External antenna port connector
Standard Compliance
Read Range
CPU
User Device Interface
Ethernet Interface
User Interface
USB Host Interface
I/O interface
Electrical Power
IP Rating
Operating Temperature
Dimensions
Weight

Tab. 10.1: Hex R1290I Technical Specifications

TECHNICAL SPECIFICATIONS - Hex R1290I Technical Information Manual
865.600÷867.600 MHz (ETSI EN 302 208 v3.1.1) (Mod: R1290IE)
902÷928 MHz (FCC part 15.247) (Mod: R1290IU)
Programmable in 18 levels (1dB step) from 8 dBm ERP to 25 dBm ERP (Mod.
R1290IE)
Programmable in 18 levels (1dB step) from 8,5 dBm ERP to 25,5 dBm ERP
(Mod. R1290IU)
Programmable in 18 levels (1dB step) from 10 dBm to 27 dBm
4 channels (compliant to ETSI EN 302 208 v3.1.1) (Mod. R1290IE)
50 hopping channels (compliant to FCC part 15.247) (Mod. R1290IU)
0,2dBi typ. (Mod. R1290IE)
0,7dBi typ. (Mod: R1290IU)
Circular
SMA jack
EPC C1G2/ISO 18000-63
Up to 100cm (typical)
ARM9 @ 400Mhz on Atmel AT91SAM9G25
USB 2.0 Hi-Speed (480 Mbit/s) device port
Virtual COM port parameters:
 Baudrate: up to 115200 kbps
 Databits: 8
 Stopbits: 1
 Parity: none
 Flow control: none
Ethernet 10/100/1000BASE-T (RJ45)
POE standard IEEE 802.3af
Button V : OK / Trigger or other functions controlled by firmware
Arrow up : scroll up or other functions controlled by firmware
Arrow down : scroll down or other functions controlled by firmware
Led #1: power indication (green : ON)
Led#2: RF activity (yellow blinking: RF)
Led#3: Tag-Identification (red blinking : TAG-ID)
Led#Antenna: Tag-Identification (white blinking : TAG-ID)
Buzzer: bitonal for events signaling
Proximity sensor: trigger
OLED display 2.42" monochromatic (white)
USB 2.0 High Speed Host Port
max 500mA
Push-in PCB terminals
1 digital Input
1 solid state photorelay output (500mA max)
5V ± 5% – DC power supply (10W)
POE standard IEEE 802.3af (12,95W)
IP30
-10 °C to +55 °C
3
(W)220 x (L)170 x (H)25mm
3
(8.66 x 6.69 x 0.98 inch
)
475g
52

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hex r1290ieHex r1290iu

Table of Contents