Advertisement
Safety Precautions
>
Contents
Appendix
> Safety Precautions
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use the printer
safely. Do not attempt to use the printer in any way not described in this manual. It causes unexpected
accident, fire, or electrical shock.
Warning
You may cause an electric shock, fire, or damage the printer if you ignore any of these safety
precautions.
Choosing a
Do not place the printer close to flammable solvents such as
location
alcohol or thinners.
Power
Never attempt to plug in or unplug the printer from the power
supply
supply when your hands are wet.
Always push the plug all the way into the power outlet.
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around
the printer, immediately unplug the printer at the power supply
and call for service.
failure and fire.
If you hear thunder, disconnect the power supply of the printer
and refrain from using it. Leaving the printer plugged in may
cause fire, electric shock, or damage to the printer, depending
on the thunder storm.
Use the power cable included with the printer.
Cleaning the
printer
Always unplug the printer from the power outlet before
cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could
injure yourself or damage the printer.
Advanced Guide
Never damage, modify, stretch or
excessively bend or twist the power
cord. Do not place heavy objects on
the power cord.
Never plug the printer into a power
socket that is shared with other
equipment (extension lead/cord, 2- or
3-way adapter, etc.).
Periodically, unplug the printer and
use a dry cloth to wipe off any dust or
dirt collected on the plug and the
power outlet. If the printer is placed at
a location exposed to a lot of dust,
smoke, or high humidity, the dust
collected on the plug absorbs
moisture and may cause insulation
Use a damp cloth to clean the printer.
Never use flammable solvents such
as alcohol, benzene or thinners.
If flammable solvents come in contact with
electrical components inside the printer, it
could cause a fire or electric shock.
Стр. 57 из 342 стр.
Troubleshooting
Advertisement
