Advertisement
FINE Cartridge Holder Does Not Move to the Position for Replacing
>
Advanced Guide
Troubleshooting
FINE Cartridge Holder Does Not Move to the Position for
Replacing
Check 1: Is the Power lamp off?
Check if the Power lamp is lit green.
The FINE Cartridge Holder will not move unless the power is on. If the Power lamp is off, close the
Front Cover and turn the printer on.
While the Power lamp is flashing green, the printer is initializing. Wait until the Power
flashing and remains lit green, and then open the Front Cover again.
Check 2: Is the Alarm lamp flashing?
Close the Front Cover, confirm the number of times the Alarm lamp is flashing, take the appropriate
action to resolve the error, and then reopen it. For details on how to resolve the error, see
Lamp Flashes Orange
Check 3: Has the Front Cover been left open for 10 minutes or longer?
If the Front Cover is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right
to prevent the Print Head from drying out. Close and reopen the Front Cover to return the FINE
Cartridge Holder to the left.
Check 4: Has the printer been printing continuously for a long period?
Close the Front Cover, wait a while, then reopen it.
If the printer has been printing continuously for a long time, the Print Head will overheat, and the
printer stops printing temporarily to protect the Print Head.
note
Opening the Front Cover while printing moves the FINE Cartridge Holder to the right. Close the
Front Cover, and reopen it after printing is complete.
> FINE Cartridge Holder Does Not Move to the Position for Replacing
.
Стр. 302 из 342 стр.
lamp stops
Alarm
Page top
Advertisement
