Advertisement
Aligning the Print Head
>
Routine Maintenance
Contents
Aligning the Print Head
If printed ruled lines are misaligned or print results are not even, adjust the print head position.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on and a sheet of A4 or Letter-sized plain paper
are loaded in the Rear Tray.
Set the Paper Thickness Lever to the left. See
2.
Open the printer properties dialog box.
See
Opening the Printer Properties Dialog Box (Windows)
3.
Print the print head alignment pattern.
Click the Maintenance tab.
(1)
Click Print Head Alignment.
(2)
Confirm the displayed message, and click OK.
(3)
The print head alignment pattern will be printed. Do not open the Front Cover while printing is in progress.
Printing takes about 3 minutes to complete.
After the pattern below is printed, make sure that the pattern is printed properly,
(4)
and click Yes.
>
When Printing Becomes Faint or Colors Are Incorrect
Front View
.
.
Advanced Guide
Troubleshooting
> Aligning the Print Head
Стр. 42 из 342 стр.
Advertisement
