Specifications - Stanley NB08PT-18 Instruction Manual

Battery charging.
Battery charged.
Hot/cold pack delay.
Charges Li-Ion battery packs.
Only for indoor use.
Charge DEWALT®/POP®Avdel® battery packs
only with designated DEWALT®/POP®Avdel®
chargers. Charging battery packs other
than the designated DEWALT®/POP®Avdel®
batteries with a DEWALT®/POP®Avdel®
charger may make them burst or lead to other
dangerous situations.
STANLEY Engineered Fastening policy is one of continuous product development and improvement and we reserve
the right to change the specifi cation of any product without prior notice.

2. SPECIFICATIONS

Each section of this instruction manual has a box which highlights to which tool this instruction the following boxes are
examples, with an explanation too:
NB08PT-18
Applicable only to NB08PT-18 Tool
Applicable only to PB2500Smart Tool
Applicable to both NB08PT-18 and PB2500Smart Tools
Touch the current counter
value
Applicable to NB08PT-18 only
PB2500Smart
NB08PT-18
NB08PT-18
7
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for the
enviroment.
Do not incinerate the battery pack.
See technical Data for charging time.
Do not charge damaged battery packs.
Your DEWALT® charger is duable insulated in
accordance with EN60335; therefore no earth
wire is required.
PB2500Smart
PB2500Smart
Not Available
E N G L I S H