Hardware Installation; Initial Checks; Installation Location - Emerson PACSystems RX3i Quick Start Manual

Quick Start Guide
GFK-2948A

2. Hardware Installation

2.1.

Initial Checks

Upon receiving your RX3i equipment, carefully inspect all shipping containers for
damage. If any part of the system is damaged, notify the carrier immediately. The
damaged shipping container should be retained as evidence for inspection by the
carrier. As the consignee, it is your responsibility to register a claim with the carrier in
the event of damage incurred during shipment.
After unpacking the RX3i equipment, record all serial numbers. Serial numbers are
required should you need to contact Customer Care during the warranty period. All
shipping containers and all packing material should be saved should it be necessary
to transport or ship any part of the system.
Verify that all components of the system have been received and that they agree with
your order.
2.2.

Installation Location

This product is intended for use with the RX3i system. Its components are considered
open equipment (having live electrical parts that may be accessible to users) and
must be installed in an ultimate enclosure that is manufactured to provide safety. At
a minimum, the enclosure shall provide a degree of protection against solid objects
as small as 12 mm (for example fingers). This equates to a NEMA/UL Type 1 enclosure
or an IP20 rating (IEC 60529) providing at least a pollution degree 2 environment. For
details about installing RX3i rack systems, refer to GFK-2314, RX3i System Manual.
If you need technical help, contact Technical Support. For phone numbers and email
addresses, refer to GFK-2949, PACSystems RX3i Ethernet IEC 104 Server Module User
Manual the section, Contact Information.
Hardware Installation
Section 2
Sep 2019
5