Quick Start Guide
Section 3
GFK-2948A
Sep 2019
3.2.
Confirm EIS001 Communication with the CPU
Power up the target RX3i system. In PME, go "online", right-click on the target and
select Online Commands, Show Status..., Details, to display the Device
Information Details window. This queries the CPU and all modules present on all
racks in the system, whether configured or not. If the EIS001 will appear as a ETM
module, displayed in the list similar to the following screenshot, it indicates that the
module has powered up as expected, is communicating with the CPU over the rack
backplane, and that it is ready for further configuration.
Configuration
11