Sony WALKMAN WM-GX822 Operating Instructions Manual page 51

* Dolby noise reduction
manufactured under license from
Dolby Laboratories Licensing
Corporation.
"DOLBY" and the double-D symbol
a are trademarks of Dolby
Laboratories Licensing
Corporation.
Adjusting the Playback
speed
You can choose from 6 playback
speed steps, three in fast speed,
two in slow speed and one in
normal speed. Approximately
from +30% to –20%.
Turn SPEED CONTROL•TIME/
TUNE to FAST/+.
(When turning the control all the
way, the steps changes rapidly.)
(Approx. speed)
Playback Speed
+10%
+20%
+30%
Turn SPEED CONTROL•TIME/
TUNE to SLOW/–.
(When turning the control all the
way, the steps changes rapidly.)
(Approx. speed)
Playback Speed
–10%
–20%
Display
FAST 1
FAST 2
FAST 3
Display
SLOW 1
SLOW 2
To put back the normal
speed
Turn SPEED CONTROL•TIME
TUNE repeatedly until "PLAY"
will appear in the display.
Notes
• If you open the cassette holder or
start the recording operation, the
playback speed will automatically
change back to the normal speed.
• The setted playback speed will be
memorized until changed back to
the normal speed.
• You can not change the recording
speed by the playback speed.
IC Repeat Playback
Playback repeats 4 seconds from
the point you press REPEAT IC/A-
B.
When the tape operation is
stopped, press REPEAT IC/A-B,
"4" appears in the display. On the
remote control "IC. REP" will
appear.
During playback press MENU
repeatedly, to set the cursor to IC.
REP in the display. Press SET to
show "4".
To slow down the playback
on IC Repeat
When you press REW•AMS
during the IC repeat playback,
"SLOW" will appear and the
playback will speed down to 10%.
To put back the normal speed
press FF•AMS.
51