About this task
The following image indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
1. Align and place the camera module into the slot on the display back cover.
2. Connect the camera cable to the connector on the camera module.
3. Adhere the tape to secure the camera cable in place.
Next steps
1. Install the
display
hinge.
2. Install the
display
panel.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the
base
cover.
6. Install the
microSD
card.
7. Install the
SIM
card.
8. Exit
Service
Mode.
9. Follow the procedure in
eDP/display cable
Removing the eDP cable
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
display
assembly.
9. Remove the
display
bezel.
10. Remove the
display
panel.
84
Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.