Steps
1. Align the notch on the 2280 solid-state drive with the tab on the solid-state drive slot.
2. Slide the 2280 solid-state drive firmly into the solid-state drive slot at an angle.
3. Place the solid-state drive thermal plate over the solid-state drive.
4. Align the screw holes on the solid-state drive and thermal plate with the screw hole on the palm-rest and keyboard
assembly.
5. Replace the two (M2x2) screws that secure the 2280 solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the
microSD
card.
2. Install the
SIM
card.
3. Install the
base
cover.
4. Exit
Service
Mode.
5. Follow the procedure in
Memory
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
About this task
NOTE:
Latitude 5521 supports two memory slots.
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
32
Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.