Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly at an angle, into the memory-module slot.
3. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 4 to install any other memory modules in your computer.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Install the
SIM
card.
4. Exit
Service
Mode.
5. Follow the procedure in
Hard-drive assembly
Removing the Hard drive
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
About this task
The figure indicates the location of the Hard drive and provides a visual representation of the removal procedure.
34
Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.