Steps
1. Align and place the power-button board on the palm-rest assembly.
2. Replace the two screws (M2x2) that secure the power-button board to the palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the
assembly inner
3. Install the battery.
4. Install the
WWAN
card.
5. Install the
WLAN
card.
6. Install the
2280 solid-state drive
7. Install the
memory
module.
8. Install the
base
cover.
9. Install the
microSD
card.
10. Install the
SIM
card.
11. Follow the procedure in
Smart card reader
Removing the smart card reader
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
SIM
card.
4. Remove the
microSD
5. Remove the
base
cover.
6. Remove the
2280 solid-state drive
frame.
or
2230 solid-state
After working inside your
Before working inside your
card.
or
2230 solid-state
drive.
computer.
computer.
drive.
Removing and installing components
61