Sloped Roof Installation With Roof Brackets General Information; Sloped Roof Installations For Vitosol 200-Fm Flat-Plate Collectors - Viessmann VITOSOL 200-FM SV2F Design Manual

Solar System Design Guide

Sloped Roof Installation with Roof Brackets General Information

Roof hooks for shingled roofs
Slope Roof Installations for Vitosol 200-FM Flat Plate Collectors
Overview - sloped shingled roof installation
Legend
A Mounting brackets
B Collector
C Mounting rail
D Shingles
E Roof joist
Type a
SV
93c (2380)
SH
41c (1056)
in. (mm) b
74c - 82c (1900 - 2100)
17c - 33b (450 - 850)
H This fixing system can be used for shingled or slate
roofs.
H The fixing system comprises roof brackets, mounting
rails, clamping brackets and screws.
H Forces are applied to the roof structure in various ways,
including via the roof brackets and the slate cover.
As these elements can vary greatly, damage may occur
when loads are applied. We therefore recommend
installing additional sheet lead or appropriate flashing
between the roof brackets and the roof material.
Secure mounting brackets A on site with factory
supplied screws to the roof joist. For dimensions see
'Installing the mounting frames' from pages 49 and 50.
in. (mm) c
94b (2400)
42b (1077)
Refer to the Vitosol-FM Installation Instructions
for all mounting hardware dimensions and
detailed installation instruction
Design Information
in. (mm) d in. (mm)
2c (70)
2c (70)
47