Makita BO4555 Instruction Manual page 6

1
► 1 . Claws 2. Upper part
Insert the notch of the paper dust bag into the guide of
the paper dust bag holder. Then install the paper dust
bag holder set on the tool.
► 1 . Notch 2. Guide
2
2
1
Installing paper filter bag
► 1 . Holding tab
Make sure that the logo on the cardboard lip and the
logo on the dust box are on the same side, then install
the paper filter bag by fitting the cardbord lip in the
groove of each holding tab.
► 1 . Dust box 2. Dust nozzle
Make sure that the logo on the cardboard lip and the
logo on the dust nozzle are on the same side, then
install the dust nozzle on the dust box.
Removing dust box and paper filter bag.
1
► 1 . Latch 2. Dust nozzle
Remove the dust nozzle by pushing the two latches.
6 ENGLISH
1
1
2
2