Makita BO4558 Instruction Manual
Finishing sander
Hide thumbs
Also See for BO4558:
- User manual ,
- Instruction manual (45 pages) ,
- Instruction manual (11 pages)
Related Manuals for Makita BO4558
Summary of Contents for Makita BO4558
- Page 1 INSTRUCTION MANUAL Finishing Sander BO4555 BO4556 BO4557 BO4558 009089 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
Uncertainty (K) : 3 dB(A) together with household waste material! The noise level under working may exceed 80 dB (A). In observance of European Directive 2002/96/EC on waste electric and Model BO4558 electronic equipment Sound pressure level (L ) : 79 dB(A) -
Page 3: General Power Tool Safety Warnings
Distractions can cause Makita Corporation responsible you to lose control. manufacturer declare that the following Makita Electrical safety machine(s): Power tool plugs must match the outlet. Never Designation of Machine: modify the plug in any way. Do not use any... -
Page 4: Sander Safety Warnings
Personal safety dangerous in the hands of untrained users. Stay alert, watch what you are doing and use 22. Maintain power tools. Check for misalignment common sense when operating a power tool. or binding of moving parts, breakage of parts Do not use a power tool while you are tired or and any other condition that may affect the power tool’s operation. -
Page 5: Functional Description
Be sure to remove the punch plate before operating • the tool. Model BO4555 only NOTE: Use Makita hook-and-loop sandpaper with this sander. 1. Velcro sandpaper 2. Base 008299 Open the paper clamp by raising on the lever to release... - Page 6 the holes on the pad (the dust will be sucked into 1. Claws these holes; it is therefore important to leave them 2. Upper part open). Press the paper firmly over the pad. To remove the sandpaper: Set the tool upside down so that the sandpaper is on top.
-
Page 7: Maintenance
If you need any assistance for more details regarding side of its cardboard lip, then by pulling the cardboard lip these accessories, ask your local Makita Service Center. downwards to move it out of the holding tab of the dust Abrasive paper (without pre-punched holes) box. - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884717G227...